CirCut PCB VCut Depanelers/Separators
board separation without the stress

The CirCut depaneler has been precision designed and manufactured in England to separate/depanel v-cut scored, component-loaded PCB's cleanly and effortlessly.

As surface mounted components continue to get smaller and more delicate, it is increasingly important to reduce distortion in the depaneling "breakout" process. This reduces scrap rates and "in the field" failures, which prove costly in terms of down-time, replacement and customer confidence.

CirCut depaneler/separators for scored printed circuit boards
Video clip - CirCut M35 Video clip - CirCut P35 Video clip - CirCut M35 alloy panels

Reduced Component Failure

Since there is no flex or distortion in the depaneling process, a significant reduction in post breakout printed circuit board (PCB) and/or component failure can be expected, saving time and money.

No flex or distortion reduces post breakout PCB or component failure

CirCut Features:

  • one step PCB separation & finishing
  • depanels PCB boards with components upto 70mm tall
  • 1mm clearance required for separation
  • small separator channel required*
  • PCB panels from 0.5 to 3mm thick depaneled effortlessly
  • separates PCB panels upto 700mm
  • compensates for inconsistent web-thickness
  • handles intermittant scoring
  • PCB edge conditioning to reduce fibres
  • hardened and ground blades & guides
  • can accept populated PCB boards with component overhang^
  • quick & simple setup
  • manually operated or powered versions available
  • designed, manufactured and serviced from the UK

* components can be adjacent to the score-line on one side of the blade and small components 1mm away on the other side, increasing to a maximum requirement of 3mm for tall components.

^manually powered circut can be designed to accept component overhang

Flexibility in Scoring Depth

The CirCut depaneler allows more flexibility in scoring depth - PCB's with thicker webs, which previously resulted in jagged breakout with loose fibres, are now separated/depaneled with a conditioned finished board edge.

no more jagged edges when using a CirCut depaneler/separator

One Step Separating and Finishing

The Circut depaneler utilizes precision, hardened and ground separator blades with score-location guides which effortlessly slice the remaining web, leaving PCB board edges clean and smooth.

Circut depaneler/separators use precision, hardened and ground separator blades
M35 - manually powered CirCut depaneler/separator to separate vcut scored PCB boards P35 - powered CirCut depaneler/separator to separate vcut scored PCB boards
Specification M35 M70 P35
Length 980mm 980mm 980mm
Width 450mm (variable) 450mm (variable) 450mm
Height 425mm 495mm 430mm
Weight 57kg 58kg 58kg
Supply Manual Manual 240V ac 50Hz (1-24m/min variable)
Panel clearance (top) 34mm 70mm 34mm
Panel clearance
28mm 28mm 28mm
Blade Angle 28 degrees 28 degrees 13 degrees
Guides Hardened & ground Hardened & ground Hardened & ground
Max Panel Size 400mm 400mm 700mm

Thank-you for your interest in the Seetrax CirCut depaneling machines - used to separate v-cut scored printed circuit boards.

Please contact us for more information.

Return to Top